What Should I Do If My Vacuum Cleaner Isn’t Sucking Properly?

Keeping the floors clean and dust-free is a joy, thanks to the convenience of vacuum cleaners. Since we put vacuum cleaners through a lot of use, they occasionally break down, but the good news is that the vast majority of the time, the problem is not hard to solve. Choose your vacuum’s problem from the list to the right to learn how to fix it yourself.

A vacuum cleaner is one of the most frequently used home appliances. We can always count on them to swoop in and clean up the worst disasters that life throws at us. However, there is some damage that can be done to even the most durable machinery. There are a few things you should never do with your vacuum cleaner to keep it in working order at all times.

The biggest drawback of utilising a bagged vacuum is the constant need to change the bags as they become clogged with debris. Although it may seem like a good idea to dump the dust from the vacuum bag and reuse it, doing so can reduce the effectiveness of the vacuum.

In time and with repeated use, a very fine coating of particles will line the inside of a vacuum bag, remaining there even after the load has been removed. This prevents the bag’s inlet and outlet from receiving the necessary airflow. Suction decreases as airflow is diminished. So, make sure to frequently inspect, change, and replace the vacuum bag.

There are a few easy things you may do at home to restore suction, dirt-picking ability, or even full functionality to your vacuum cleaner.

Inadequate suction in vacuum cleaners is typically caused by one of several issues, including a knotted brush bar, clogged filters, an overflowing dust container, or obstructed airways. The effectiveness of your vacuum cleaner could be greatly enhanced by making these repairs. If your vacuum has lost suction, this manual will walk you through several fast solutions.

Whether you’re just starting out with us or your home hasn’t been cleaned in three months, this is something we highly recommend.

Vacuum Repair Guide

When a vacuum loses suction or experiences other problems, rather than just buying a new one, why not give DIY repairs a try? It may come as a surprise to learn that many vacuum issues are fixable at home; this article addresses several of the most common concerns. If you want to know if your vacuum cleaner can be saved, keep reading!

Why did it suddenly stop working?

If there is a problem with the suction, you should examine the pipes, filters, and rollers. Without suction, a vacuum is pretty much worthless, but oftentimes the issue is as simple as a blocked roller, hose, or filter. Unplug the vacuum, flip it over, and see if the roller can be manually spun to inspect the parts. Check the nozzles and hoses to see if they are blocked. Also, make sure the filter isn’t clogged with debris or dust.

• Look for clogs in the hose attachments as well.

If the vacuum is making noise or the roller isn’t spinning, you may need to check the belt. The roller that aids in dirt and debris collection is connected to the motor by a strap. Turn the vacuum over if it makes a shrill noise or if the roller stops turning after being plugged in. Check for a broken or cracked belt by opening the bottom plate, which normally just requires removing a few screws.

• If you’ve never shopped for vacuum cleaner belts before, don’t worry; you can find them in any hardware store or on any e-commerce website.
• Try taking it to a vacuum repair shop if you’re having trouble figuring out what’s wrong with it.

If the engine keeps shutting off or won’t turn on, check the plug. Although the power cable for your vacuum can withstand significant strain, it is susceptible to cracking, splitting, and fraying, especially at the plug. After unplugging the vacuum, you should examine the entire length of the power cord and the plug for damage. If you find a broken cable, don’t utilise the hole until you’ve fixed it or had it fixed.

• If the cord is undamaged, the problem is likely to be in the motor. You shouldn’t try to fix a broken vacuum’s engine on your own.

What can I do to remedy the problem of weak suction?

If the container or bag has been clogged with dirt and dust, it must be emptied. Remove the power cord and release the clasp to access the vacuum’s bag container. To switch packs, just remove the cardboard collar from the old bag, replace it with the new one, and re-attach it to the vacuum. Remove the canister from your bagless canister vacuum, flip open the top, and empty the contents into the garbage. Take the process outside, where it will generate less dust within.

• For more in-depth guidance, please refer to the product’s manual.

You should check the filter and either clean it or replace it if necessary. There is at least one filter in your vacuum, and perhaps more. If it’s a bagged vacuum, you’ll find one at the point where the bag attaches to the machine, and at the exhaust vent where the air is expelled when the vacuum is in operation. For information on where filters are located, how to clean them, and how to replace them, consult your product manual or the manufacturer’s website.

• When the filter gets dirty, I take it outside and tap it on a hard surface to get the dust and debris out. Keep the dust away from you by ensuring a steady wind.
• When most of the dust and dirt has been pushed out of a filter, you can give it a quick rinse in cool water to clean it. Wait at least 24 hours after washing your filter to put it back in place.
• If you want to maintain your vacuum working smoothly, you should change the filter(s) every three to six months.

How come the roller isn’t turning?

It’s time to remove the roller and get your scissors out to trim off the hair and other debris. The roller access plate can be removed by inverting the vacuum while it is unplugged and removing the screws or clips holding it in place. In most cases, you may remove the roller by removing a few screws or pins. Use scissors to make a clean cut through the hair and the length of the roller, taking care not to snip any of the bristles. The rollers bristles and the vacuum’s underbelly can be cleaned with a paintbrush and then replaced.

• It can be shocking to see how much debris the roller collects, even hair. It’s important to keep the roller clean so it can continue to gather up as much hair as possible.
• When in doubt, check with the product’s handbook or the manufacturer’s website.

But What If The Hose Gets Clogged?

Using only basic equipment, you should be able to free the hose from any obstructions. If the hose isn’t linked to the vacuum permanently, remove it. Remove any obstructions from the hose’s outlet using pliers or your fingers. If the obstruction is particularly deep, you can use a wire hanger bent into a flat shape or a vacuum snake tool, both of which can be found on the internet. Insert the wire or snake into the tube, turn it, then pull to remove the blockage. If there are obstructions that you are unable to remove, you should have the vacuum serviced.

• Remove any debris or obstructions from the attachments as well.
• If the hose can be taken apart entirely, you can check for blockages by dropping a penny down it. The hose is free of obstructions if a coin can be dropped into it and flow freely. If the tube is attached to the hoover, you should not put money into it.

What is the procedure for replacing a worn-out belt?

Look for the belt that is fastened to the roller, and swap it out for a new one. To gain access to the roller, unplug the vacuum, turn it over, and remove the screws or clips. Locate the belt that connects the roller to the drive mechanism. Simply slide the old belt off of its two attachment points, and then use a paintbrush or a toothbrush to clean the dust from there. The replacement belt should be a perfect fit, and it should be put onto the connecting points with the letters on the strip facing outward. Before replacing the access plate, test the roller by turning it by hand to ensure it is working properly.

• If the roller isn’t easily accessible, you may need to take apart your machine to change the belt. If you have any questions about how to use your vacuum, the handbook should be your first stop.
• Belts for vacuum cleaners are cheap and simple to find on the internet. However, for whatever reason, not all vacuum cleaners use the same straps, so you’ll need to get one that’s made specifically for your model.

Worst Case Scenario: The Plug Breaks

Make your own repairs by severing the connector and wiring from a replacement. Unplug the power source and cut the cord with wire cutters about 2 to 3 inches (5.1 to 7.6 centimetres) from the plug. Using wire strippers, remove the insulation from the power cord’s inner two or three wires, exposing the bare copper. Remove another 12-1 in (1.3-2.5 cm) of insulation from each wire. Simply unscrew the protective cap from the new plug and wrap the corresponding wire from the power cable tightly around the corresponding terminal in the new plug three times. Cover the fresh pin back up again.

• If the damage is closer to the centre of the cord, remove the bad piece, replace the plugs , wire them as stated above, and connect them together.
• The “neutral” white wire and the “hot” black wire are standard in all power cords. Connect the green wire from your old plug’s “ground” port to the screw on your new plug’s green “ground” port if your vacuum’s power cord has one. A ground wire may not be present in your vacuum.
• If you don’t feel confident repairing your electrical wiring on your own, it’s best to hire a professional.

Never Do These Things With Your Vacuum Cleaner

Pick up Tough Material with a Vacuum

Most of us are guilty of running the vacuum over a coin, pin, or small stone that we see on the floor when cleaning instead of stopping to pick it up.

However, this may be a serious error. These solid items pose a significant threat to the internal workings of the device, and they can become stuck in tight spaces from which they will be difficult to extract. It’s true that this kind of error might not completely kill the vacuum cleaner every time, and that certain machines are surprisingly robust in the face of this kind of mistreatment, but it only takes one time to completely wreck an expensive vacuum cleaner. Always manually pick up heavy objects to avoid injury.

Cleaner Melbourne cares about you and your home and offers a comprehensive cleaning and upkeep service.

Suction up Fluids

It is not the job of a standard vacuum to pick up liquids like water. Keep in mind that you could electrocute yourself and severely damage the vacuum cleaner if you ever try to run it over a pool of water. The dust bin or bag emptying process will be unpleasant at best, even if calamity is avoided.

However, wet-dry vacuums, often known as shop vacs, are safe to use with water and other liquids since they are intended to handle such conditions. A wet-dry vacuum is an affordable addition in case of an emergency that necessitates cleaning up a spill or puddle. However, you should never use a standard vacuum for this purpose.

Overfilling? Start the Vacuum!

The trash can or bag must be emptied when it becomes full. If you don’t, the vacuum cleaner’s performance will suffer greatly, and it could even overheat and break. When we’re in a rush, it’s easy to convince ourselves that the items already in our bags are sufficient for completing one more task. After that, another. Moreover, there is another another.

Check the bag or bin to see if it’s full if the vacuum seems to be losing suction. In most cases, removing them will greatly improve your vacuum’s performance. Emptying the machine on a regular basis can help it last longer by reducing the load on the motor.

Breaking the Wires

The cords of vacuum cleaners are normally quite sturdy and can survive a fair amount of abuse, but it is still a poor idea to run a vacuum cleaner with a rotating blade over an electrical line. In the process of sucking dirt into your vacuum, you may accidentally rip or otherwise harm the exterior of the power cord. Even the highest quality cables will begin to exhibit signs of wear and tear when enough time has passed, rendering them unsafe for use.

Don’t Waste Time Fixing That Old Machine

There’s a chance that your vacuum isn’t as effective at cleaning up dust and grime as it once was. It may not be as ancient as you think it is, so don’t throw it out just yet. The machine can be fixed in several simple ways to get it working again.

See if there is a dust bag or can that has to be emptied first. Many vacuums lose suction power and become less efficient as they fill. It’s possible there’s a clog in the vacuum cleaner if emptying doesn’t help. Remove the power cord and start investigating. Have you checked to see whether the hose is clogged? Where do the hoses enter the device, exactly?

Do you need to clean out the brush roll because it’s clogged with hair and carpet fibres or because it’s not turning freely? When you clean the brush roll on your vacuum, it’s like new again. Maintaining your vacuum cleaner on a regular basis helps keep it functioning like new.

Assume the Engine Is Out of Order

Have you ever been in the middle of cleaning with your vacuum when it unexpectedly shut off? How often does it happen? A new vacuum cleaner might be in order if you conclude from its performance that the motor is failing.

A full dust container or bag, or hair or fibres trapped up in the brush roll, are more likely causes of motor overheating in a vacuum cleaner. Try turning the device back on after making sure these problems and obstructions have been addressed. When the motor in your vacuum becomes too hot, it can turn off automatically, but as it cools down, it might start up again.

Be advised that the motor on some models can be reset by pressing a manual reset button. To learn how to reset your device, consult the manual provided by the manufacturer.

If you want to avoid unexpected breakdowns, it’s important to keep an eye on the machine’s dustbin of history or bag, hoses, hose connections, and brush roll.

How to Take Care of Your Vacuum Cleaner

Your vacuum cleaner puts forth significant effort to maintain the cleanliness and freshness of your house. A vacuum cleaner is a home appliance that many homeowners consider an investment. The greatest approach to safeguard your investment is to treat it with the care it deserves.

You can extend the life of your vacuum and keep it functioning properly for many years by doing a few simple things. Let’s take a look at seven upkeep tricks that will keep your vacuum in good working order.

Always keep a supply of new bags on hand.

Changing the bag on your vacuum cleaner is one of the simplest and least time-consuming ways to keep it in good working order. There’s a common misconception that you only have to switch your bags when they get heavy. Nonetheless, for optimal machine performance, you should change the pouch out when it’s about two-thirds full, and not when it’s entirely full of dirt.

If there is already a considerable amount of debris in the bag, the vacuum cleaner will not be able to fit what it takes up and will not perform as well as it could.

Check that the Bag is Securely Fastened

Though it may appear simple at first, some people may have trouble properly attaching the bag to their vacuum due to the wide variety of brands, models, and styles available. This is truer than ever for first-timers.

While the specifics of bag attachment vary by type, one constant is that the bag’s opening must be properly positioned above the nozzle. You should also secure any clips, holders, or hooks into place.

We offer professional Cleaning services. Is your house messy and smelly? Let Cleaner Melbourne handle it.

Conclusion 

Vacuum cleaners are one of the most popular home appliances, but they can occasionally break down. To keep them in working order, there are a few things you should never do. The biggest drawback of using a bagged vacuum is the constant need to change the bags as they become clogged with debris. Inadequate suction in vacuum cleaners is typically caused by one of several issues, such as a knotted brush bar, clogged filters, an overflowing dust container, or obstructed airways. There are easy things you can do at home to restore suction, dirt-picking ability, or even full functionality to your vacuum cleaner. This manual will walk you through several fast solutions if your vacuum has lost suction, and is something we highly recommend. 

When a vacuum loses suction or experiences other problems, it is important to give DIY repairs a try. This article addresses several of the most common concerns, such as why did it suddenly stop working? If there is a problem with the suction, examine the pipes, filters, and rollers. If the vacuum is making noise or the roller isn’t spinning, check the belt. If the engine keeps shutting off or won’t turn on, check the plug.

If the cord is undamaged, the problem is likely to be in the motor. What can be done to remedy the problem of weak suction? If the container or bag has been clogged with debris or dust, try taking it to a vacuum repair shop.

Content Summary: 

• Keeping the floors clean and dust-free is a joy, thanks to the convenience of vacuum cleaners.
• Since we put vacuum cleaners through a lot of use, they occasionally break down, but the good news is that the vast majority of the time, the problem is not hard to solve.
• Choose your vacuum’s problem from the list to the right to learn how to fix it yourself.
• A vacuum cleaner is one of the most frequently used home appliances.
• We can always count on them to swoop in and clean up the worst disasters that life throws at us.
• However, there is some damage that can be done to even the most durable machinery.
• There are a few things you should never do with your vacuum cleaner to keep it in working order at all times.
• The biggest drawback of utilising a bagged vacuum is the constant need to change the bags as they become clogged with debris.
• Although it may seem like a good idea to dump the dust from the vacuum bag and reuse it, doing so can reduce the effectiveness of the vacuum.
• In time and with repeated use, a very fine coating of particles will line the inside of a vacuum bag, remaining there even after the load has been removed.
• This prevents the bag’s inlet and outlet from receiving the necessary airflow.
• Suction decreases as airflow is diminished.
• So, make sure to frequently inspect, change, and replace the vacuum bag.
• There are a few easy things you may do at home to restore suction, dirt-picking ability, or even full functionality to your vacuum cleaner.
• Inadequate suction in vacuum cleaners is typically caused by one of several issues, including a knotted brush bar, clogged filters, an overflowing dust container, or obstructed airways.
• The effectiveness of your vacuum cleaner could be greatly enhanced by making these repairs.
• If your vacuum has lost suction, this manual will walk you through several fast solutions.
• Whether you’re just starting out with us or your home hasn’t been cleaned in three months, this is something we highly recommend.
• When a vacuum loses suction or experiences other problems, rather than just buying a new one, why not give DIY repairs a try?
• It may come as a surprise to learn that many vacuum issues are fixable at home; this article addresses several of the most common concerns.
• If you want to know if your vacuum cleaner can be saved, keep reading!
• Why did it suddenly stop working?
• If there is a problem with the suction, you should examine the pipes, filters, and rollers.
• Without suction, a vacuum is pretty much worthless, but oftentimes the issue is as simple as a blocked roller, hose, or filter.
• Unplug the vacuum, flip it over, and see if the roller can be manually spun to inspect the parts.
• Check the nozzles and hoses to see if they are blocked.
• Also, make sure the filter isn’t clogged with debris or dust.
• Look for clogs in the hose attachments as well.
• If the vacuum is making noise or the roller isn’t spinning, you may need to check the belt.
• The roller that aids in dirt and debris collection is connected to the motor by a strap.
• Turn the vacuum over if it makes a shrill noise or if the roller stops turning after being plugged in.
• Check for a broken or cracked belt by opening the bottom plate, which normally just requires removing a few screws.
• If you’ve never shopped for vacuum cleaner belts before, don’t worry; you can find them in any hardware store or on any e-commerce website.
• Try taking it to a vacuum repair shop if you’re having trouble figuring out what’s wrong with it.
• If the engine keeps shutting off or won’t turn on, check the plug.
• Although the power cable for your vacuum can withstand significant strain, it is susceptible to cracking, splitting, and fraying, especially at the plug.
• After unplugging the vacuum, you should examine the entire length of the power cord and the plug for damage.
• If you find a broken cable, don’t utilise the hole until you’ve fixed it or had it fixed.

FAQs About Fixing Vacuum Cleaner